Water Heater Size Calculator
Two methods, depending on the type of heater: for a tank, estimate the hot water your household uses in its busiest hour and compare it with the unit's first hour rating (FHR); for a tankless unit, add up the flow of the fixtures you run at the same time and the temperature rise the unit must deliver.
How to use the result
For tanks, compare the result with the first hour rating on the EnergyGuide label or in the specifications. The federal test procedure defines it as an estimate of the most hot water the heater can supply in one hour starting fully heated. Capacity in gallons alone does not tell you this: two 50-gallon tanks can have different first hour ratings.
The estimate is deliberately conservative: it counts the full flow of each shower and faucet as hot water, while in practice part of it is cold water mixed in at the tap. Fixture flows use the federal maximums (2.5 gallons per minute for showerheads and 2.2 for faucets); low-flow fixtures use less.
For tankless units, look at the manufacturer's flow chart, which shows how many gallons per minute (GPM) the unit delivers at each temperature rise. The colder your incoming water, the lower the flow at the same setting.
This is an estimate, not a professional sizing. Read more in our guide What size water heater do I need?