How do I find out how old my water heater is?
To find your water heater's age, start with the serial number on the data label, usually on the side or top of the tank. Many manufacturers encode the manufacture date in the number, but formats vary, so confirm with the manufacturer. If that fails, use the lifespan ranges below.
Reading the serial number
The data label is usually a metal or paper plate that lists the brand, model and serial number. On some tanks it sits on the top, on others on the side near the controls or behind an access panel. If the label is worn, check the top of the tank and any panel covering the controls.
Serial number patterns differ by manufacturer. Some use a letter for the month and a digit for the year, while others use a longer string with the date buried in the middle. Write down the full serial number, model and brand, then check the manufacturer's website or customer support for how to decode it.
- Locate the data label and copy the model and serial number exactly, including letters.
- Search the manufacturer's site for a serial number or date code guide.
- If the guide is unclear, call or message the manufacturer with the serial number and ask for the manufacture date.
- Record the date and subtract it from the current year to get the age.
When the serial number doesn't give a date
Some labels are missing, painted over or impossible to decode. In that case, look for paperwork and records that show when the unit was installed.
- A purchase receipt or installation invoice
- A home inspection report or closing documents
- A building permit for the installation, which your local building department may keep on file (check with your local building department about how to request records)
- The previous owner, a landlord or a property manager
If you still have no date, use typical lifespans as a guide. According to the U.S. Department of Energy, most storage (tank) water heaters last 10 to 15 years, while tankless water heaters can last more than 20 years. A tank that is 12 years old is within its typical range, but that does not mean it is failing. It only tells you that replacement planning may be worth starting.
What to do with the age once you know it
Age is one part of the picture. Signs such as rust-colored water, popping or rumbling sounds, a wet floor around the base, or water that takes longer to heat deserve attention regardless of age. A unit that is near or past its typical lifespan may also be a good time to compare replacement options.
The label or spec sheet also lists capacity ratings. Storage units show a First-Hour Rating, which estimates how much hot water the tank can supply in an hour when it starts fully heated. Tankless units list a Maximum GPM, the most gallons per minute of hot water they can deliver. Keep these numbers with your age notes so you can compare them with your household's needs.
Quick checklist
- Find the data label and record the brand, model and full serial number.
- Decode the manufacture date using the manufacturer's guide or support team.
- If no date is available, gather receipts, inspection reports or permit records.
- Compare the age with the DOE lifespan ranges: 10 to 15 years for tanks, more than 20 years for tankless.
- Note the First-Hour Rating or Maximum GPM for replacement planning.
- While you are at the unit, confirm the temperature and pressure relief valve discharge pipe is in place, not capped or plugged. The International Plumbing Code (504.6) and International Residential Code (P2804.6.1), 2021 editions, as summarized by the International Code Council, require the pipe to end in an air gap in the same room, within 6 inches of the floor or a waste receptor, with no threaded end, valves or tees. Local rules can differ, so check with your local building department.